This 150mm length servo Y-harness has a single TJC8 (MH-FC) connector on one end and a pair of TJC8 (FH-MC) connectors on the opposing end. You can use a Y-harness to run two servos off the same signal, to connect power near a high-current servo to protect the traces of the circuit board, or to connect a component that requires the same PWM signal as a servo on the other leg of the harness.
Specs
| Weight | 6.4g |
|---|---|
| Wire Gauge | 22AWG |
| Jacket Material | ABS Plastic |
| Wire Material | Stranded Copper |